eiDriver Gen II Electronic Torque Driver For Prosthetic 10-40Ncm
DSI eiDriver Gen II is a new generation electronic driver that is made for abutment screws tightening. It can be used with any motor-mount driver bit with a latch-type RA connection type. It is equipped with an adjustable torque that ranges from 10-40Ncm with 5 different options to select from and the ability to change the rotation direction - clockwise and counter-clockwise. Everything is done by a single button.
DSI eiDriver Gen II is equipped with a ring button that works in a 360° range and allows you to push the button from any direction. It gives you complete freedom of movement and availability to work both on the upper and lower jaws with the same efficiency.
The rotation direction selection is done with a single push of a control ring button and the torque selection is done with a double push of the same button ring button. This procedure is very convenient and intuitive especially when you need the adjustments in the middle of the procedure.
The driver has an ergonomically designed handle that sits perfectly in the palm of your hand. The 360-degree pressure area ring button is located on the top side of the handle which grants easy access and no need to use additional assistance.
The upper contra-angle headpiece can be disconnected and sterilized in an autoclave. The driver is delivered with 2 lithium accumulator batteries each with enough energy for 2 complete hours of work. It means that you can work with one battery and charge the other one meanwhile. Delivery of DSI items might be delayed
This pruduct is currently not available
My Cart
Our Specials
$41.95
$16.95
Defend Barrier Film, with Non-Stick Edge, Blue, 4" x 6" Sheets (1200/pk)
